Teeter Fitspine LX9 Inversion Table

Although I've been using the Teeter LX9 for just a little over a month, the results are undeniable. I'm 76 years old and have been visiting chiropractors of decades. They have always helped, but it was always a challenge to make appointments and justify the continuing costs. Because of my age, I only allow for about a 30-degree head drop from the horizontal position on my Teeter which is more than enough to give me the stretch I need. I'm not a sycophant, and I endorse products sparingly, but the Teeter LX9 is simply sensational. Oh, I'm not exactly "mechanically inclined," but assembly was quick and easy. If I could do it, anyone can.

My shoulder was hurting every morning. But since I been getting on the table about one to three times a week. My shoulder and back has been feeling wonderful.

Although this is a wonderful product we did not do our full research ahead of time and cannot use it due to health reasons. I need to send back or sell.

Waste of money

Excellent and high quality. This was easy to assemble and has helped my back considerably. I am using it for 3-4 minutes several times a day.

I have been using this for about two months twice a day for 10 to 15 minutes hoping to relieve my lower back pain. I am hoping that with time that this will help, but for now my pain is the same. I think my posture is better I feel my shoulder are no longer hunched over as much. I also think they should improve the feet lock in to a softer cushion, after 10 minutes my feet can't take muck more pain from the hard foam material. That I find is the only downside of the mechanics of the unit, everything else works as promised, I'm hoping that over time my back with stretch out and I get pain relief

With just a few minutes a day, getting on my teeter has helped me so much! My chiropractor actually recommended this to me and it keeps me out of constant pain. I recommend this to everyone! Just wish I would have gotten it sooner!

I suffer a lot of back pain due to disc fusion in L2-L6 and C4-C5 and I have lost 1 1/2" in height due to the fusions. I suffer a lot of nerve pain which I refer to as "bee stings." I purchased the Teeter FitSpine to help re-align my spine and to reduce sciatica pain. I am taking it slow on the incline due to the rods & screws, but I am feeling it is helping.

Love it! Wish we had gotten this years ago. Would definitely recommend

The Teeter FitSpine LX9 (purchased Dec. 2023) is everything promised in Teeter’s YouTube videos. Solid, thoughtful construction; folds compactly in seconds between sessions. The brilliance of this ninth generation’s features show an obvious history of successive innovations by Teeter in response to customers’ feedback. Two suggestions for a future LX10: . First, enlarge the opening of the steel ring that the Angle Tether carabiner clips into so that it’s easier to unclip for storage. . Second, in the table, add two or three additional upper slots to accept the top tab of the flexible plastic Lumbar Support. The Lumbar Support even at its highest possible location is too low for me, catching me in the coccyx (and my anatomy is not atypical). There is plenty of room above the existing topmost horizontal slot to add more without weakening the table. Moreover, oddly, the unnecessarily limited range of the upper slot series leaves the top two pairs of bottom slots unusable unless the Lumbar Support is forced into an extreme arch. Extending the Support’s range would make the table fit more users. I had to jerry-rig my setup by setting the height three inches taller than I am, and attaching weights to the head end of the table. E but apart from this, I am delighted with my table.

I was initially fairly skeptical, but decided to try this as an enthusiast over various contact and high impact sports. I’ve had varying injuries and thought lengthening the spine and relieving pressure might help lessen some lingering pain in the mid-low back, thorax, shoulder to collar, and hip areas. Once purchasing decided to try the 30-day routine by doing x2 7-min segments before leaving for the day and before bed. After about 1-week I started to feel my spine align and my hips stretch naturally. I cannot tell you how wonderful this is actually. I was in compression and never really understood what that was until feeling the release of the pressure. After the 1st month I’m now stretching and doing abs/oblique exercises while fully inverted. For me, it just feels different than hanging leg lifts and normal abs. It’s something you should try if you’re capable of handling the inversion. I have no issues and completely relax when inverted now. I feel the entire body from ankles to knees to hips to back to shoulders just release. Using a simple countdown from 15-sec I mindfully relax parts of the body starting the feet and through to the neck and it’s great. The actual inverse table itself is easy to erect and worked immediately. The adjustment using the height indicator works well. You may need to play with the height adjustment to support balancing for your weight vs true height. The Teeter is well made and very stable, so it’s easy to become comfortable and confident using in no time. I contemplated getting one for years, wish I’d done it sooner. Kudos! Love it!

I bought a teeter about 10 years ago. The only thing that was difficult was releasing my feet from the hold down device. My new teeter is so much easier to lock and release my feet; trying to release my feet the old one always was uncomfortable. Also, all the pressure point devices have been very helpful on my new one. Also, now they have many videos to help me improve my use of my new Fit Spine LX9 Inversion Table.

Have been using the Teeter 4 times a day at 60% for about 6 weeks and it appears to be helping my back. My posture is straighter, my walk is more normal and the pain in my back and leg seems to be diminished. I plan to keep it and continue using it.

I'd heard these were good but so far it has been much better than I'd hoped it would be.

I had been suffering back, neck shoulder pain and sciatica for the last 14 years. This was due to being rear ended in an auto accident. I tried physical therapy, chiropractors, medicines, you name it nothing was working. I literally was starting to give up on ever recovering. Someone asked me if I had tried an inversion table and I said yes but had hurt my back trying to get back up from inversion on the table. I thought this isn't going to work so instantly gave up on them. Then I saw your ad online and saw how you have the balance set perfectly where you just raise your arms and are brought back to the upright position. This prompted me to order the LX9. Set up was really easy. The first couple of days I inverted at a reduced angle, not sure what degree I chose but it definitely caused the vertebrae to crack! It wasn't until the third day, I st it for 60 degrees I believe and it felt like my hips popped, this almost brought tears to my eyes in a good way. The pain in my lower back and sciatica in my left leg stopped. It flew numb and tingly. This is the best I can describe it. I had pulses firing all over my lower back. Over the next few days I noticed my arm wasn't hurting, my shoulders felt so much better and even my neck felt great. This improved significantly over the next few weeks. I was using it three times a day but now I get up and use the LX9 in the morning and if my back does feel anything I use the table again. I cannot express the relieve I have received since using the table! I think the kicker to me getting this was the video of the 90 year old gentleman using the table. I highly recommend Teeter. My quality of life has been restored. Thanks Teeter!! I have recommended this to all who ask about my back improvement.

I've been using this for several weeks now and I haven't seen any relief for my back. I have wasted money on this upside down thing. Try one out before you buy.

It was easy to assembled with the application BILT. I think that for me (my case) it helped my situation. I think it is well designed and gives trust in the device.it is easy to adjust length Just wondering if there would be a easier way to adjust « personal weight »

I am a registered nurse. I am on my feet 12-14 hours a day when I work. The decompression of this inversion table is absolutely fabulous. I absolutely love my teeter! My back feels so much better. I wish I would have bought one years ago when I first started looking at inversion tables.

I’m 64 years old and after several years of increasing pain and worsening mobility, I’m back to being active and enjoying life again! Very gentle yet unbelievably effective. So easy to use and perfectly balanced. Highly recommend. THANK YOU!!

have been seeking decompression treatment. This table holds me in place and decompresses my spine. Well worth the price paid for it.

Great product!

This is amazing and took only two times on to fix sciatica!! We are in love and hooked!

I haven't had a single back issue since putting it together. Like they say in the instructions, it's not so much about the length you're inverted, it's how often you do it. Worth the money, hands down!

I had back surgery in 1980 and have had pain ever since. Arthritis has now added insult to injury! I’ve known about your product since it was invented but never really considered buying it. Recently I saw your advertisement on television which offered a free trial so, considering the constant pain, I decided to try it. One of the best decisions I’ve made! Mind you, it’s not a cure, but after I spend a few minutes on your machine I have nearly no pain! After a few hours the discomfort returns but then I get back on it and voila, pain is gone again! This thing has improved my mobility like I never thought possible! I really wish I’d bought it decades ago!

So far this has helped with my headaches. It helps relax me before I go to bed. It has exceeded my expectations.

I had a minor issue with tightness/muscle spasms in my lower back. My doctor suggested PT and an inversion table. My PT person suggested a Teeter so I purchased the FitSpine LX9 and it has helped me get back to where I was pre-treatment. Love the functionality and ease of use of the LX9.

Having used this for a while now, I can tell the difference in my lower and middle back. Like suggesed in the manual, I started with 20 advanced to 40 and now i'm at 60 degrees. I had no problems at 20 degrees but 40 seemed to irritate my lower back more than help. But when I transitioned to 60 degrees, I finally started getting the relief I was looking for. I only wish there was an attachment to help with my cervical spine. The table is very well built and will definitely last for years. It is very high quality in fit and finish. The only issue I have had with the inversion table is the measurements to set the height. It appears to be off by 2 inches. If I set it for my actual height it will not invert at all. I have to set it for 2 inches taller. (my wife has the same issue) I don't know why, but it states in the manual that that is a possiblity. Great purchase. I definitely would recommend and buy again.

After using the LX 9 for about a month, I can say I am really feeling relief from my lower back pain. Using it twice a day for about five minutes. Pleased with the results.

Balance is off. It takes way to much effort to invert. comfort level is low and feels rigid. Does have a very sturdy construction and sleek design does not require much room to use.

I was diagnosed with a bulging disc and two more impinging areas in my back. I didn’t want injections or surgery (at least right now). Even though I was in excruciating pain from hips to toes. So I invested in the Teeter and for the very first use my pain level went down 60-80%. I’m now able to continue to work and not depressed or at a loss to what I’m going to do now.